Product view 1
Product view 2
Product view 3
Product view 4
Product view 5
By Avant Garde

Colibri C2

Floorstanding speaker

Contact us

Finish — Grey-White

In-store demo

Available

Stock availability

Available

  • Two-way horn driver system

    1.5-inch mid/high driver and twin 6.5-inch bass drivers.

  • 150 W passive power handling

    Four-ohm speaker for suitable external amplification.

  • Flexible mounting options

    Optional stands or wall brackets; horizontal or vertical placement.

  • Optional C18 bass expansion

    Separate low-bass module and joining hardware available.

Product details

The Avantgarde Acoustic Colibri C2 is a compact passive two-way horn loudspeaker. A 350 mm spherical horn handles the midrange and treble, with twin 6.5-inch bass drivers and horn-loading blades covering the lower range. Its high-efficiency design requires an external amplifier.

Driver and horn system

The 1.5-inch mid/high driver uses a copper-coated titanium diaphragm with a listed moving mass of 2.2 grams. The bass units use damped carbon diaphragms and powerful neodymium motors. The formal system table specifies a 70 Hz–19 kHz range, 98 dB system efficiency, four-ohm impedance and 150-watt power handling; these are passive-speaker figures rather than built-in amplifier ratings.

Mounting and bass expansion

Integrated rubber supports and optional stands or wall brackets allow several installations, including horizontal or vertical orientation where the chosen hardware permits it. Toothed mounting rings provide angle adjustment. A separately sold Colibri C18 bass module can extend the lowest frequencies, with an optional bracket for a combined installation. Black and Grey-White combinations are shown, with additional decorative customisation available by arrangement. Stands and the C18 module are separate accessories.

Specifications

Type
Passive two-way horn loudspeaker; external amplifier required
Mid/high driver
1.5-inch; copper-coated titanium diaphragm
Mid/high horn
350 mm spherical wave horn
Bass drivers
Twin 6.5-inch; damped carbon diaphragms
Bass loading
1800 cm² bass-blade system
Formal frequency range
70 Hz–19 kHz
System efficiency
98 dB; manufacturer does not state reference condition
Maximum sound level
117 dB; manufacturer rating
Nominal impedance
4 Ω
Power handling
150 W; not internal amplifier output
Mid/high moving mass
2.2 g
Bass moving mass
12.5 g per driver
Magnets
Neodymium N52 and N40/FY40
Installation
Integrated rubber supports; optional stands/wall brackets
Orientation
Horizontal or vertical with appropriate mounting hardware
Adjustment
Toothed mounting rings for installation angle
Bass expansion
Optional Colibri C18; optional joining bracket
Finish combinations
Black; Grey-White; decorative customisation by arrangement

Dimensions

Height
660 mm; formal dimensions table
Weight
Approximately 18.5 kg each